Acrylic Display Stands Bonding Process Improving Method
Bonding process is important process during acrylic display stands production. The bonding effect will directly influence the appearance of acrylic display stands. Able Acrylic Display, as a professional acrylic display products designer and manufacturer with 20 years experience, would like to discuss about the improving method of bonding process of acrylic display stands.
First, stick a narrow strip around of the bonding point of both acrylic board, only leave out the bonding point. This is a must do step before bonding process. It can make sure the acrylic glue will not overflow to the surface of acrylic board where we do not need glue. Once the acrylic glue overflowed, it will influence the beauty of the acrylic display stands.
Second, place the bonding point of acrylic boards together. You should fasten one acrylic board on the desk. Then gently put the bonding point of another acrylic board onto the bonding point of this acrylic board. It is important to make sure the bonding point, direction and angel are perfectly matched before glue. Otherwise the bonding result will be wrong and influence the later assembling and future use.
Third, keep the acrylic boards in position before bonding. Before adding glue to the bonding point, you need some outside assistant to help you fasten the position of these two acrylic board at the right position and angel. It is better to use a suppress iron to press and fix the acrylic boards in position. Only by hand is not available to keep them in the best position.
Fourth, add glue at the bonding point. It is better to use injector to add glue at the bonding point, so that the glue rate can easily get controlled and avoid overflow. In addition, the glue must evenly add at the bonding point, make sure all the bonding point get enough glue. Otherwise the bonding point may not firm and reliable.
Fifth, keep the acrylic boards in position until the glue is dry. After the glue is added to the bonding point, we still need to keep them in position before the glue dry out. Also, the suppress iron should not move away before the glue dry out. In general, the bonding process is a careful process, every detail is important. The perfect bonding acrylic display stands will not leave any glue point and dirt on the surface. This is also important production technique that can reflect the manufacturing ability of an acrylic display stand manufacturer.
 |
| acrylic display stands bonding process |
First, stick a narrow strip around of the bonding point of both acrylic board, only leave out the bonding point. This is a must do step before bonding process. It can make sure the acrylic glue will not overflow to the surface of acrylic board where we do not need glue. Once the acrylic glue overflowed, it will influence the beauty of the acrylic display stands.
Second, place the bonding point of acrylic boards together. You should fasten one acrylic board on the desk. Then gently put the bonding point of another acrylic board onto the bonding point of this acrylic board. It is important to make sure the bonding point, direction and angel are perfectly matched before glue. Otherwise the bonding result will be wrong and influence the later assembling and future use.
Third, keep the acrylic boards in position before bonding. Before adding glue to the bonding point, you need some outside assistant to help you fasten the position of these two acrylic board at the right position and angel. It is better to use a suppress iron to press and fix the acrylic boards in position. Only by hand is not available to keep them in the best position.
Fourth, add glue at the bonding point. It is better to use injector to add glue at the bonding point, so that the glue rate can easily get controlled and avoid overflow. In addition, the glue must evenly add at the bonding point, make sure all the bonding point get enough glue. Otherwise the bonding point may not firm and reliable.
Fifth, keep the acrylic boards in position until the glue is dry. After the glue is added to the bonding point, we still need to keep them in position before the glue dry out. Also, the suppress iron should not move away before the glue dry out. In general, the bonding process is a careful process, every detail is important. The perfect bonding acrylic display stands will not leave any glue point and dirt on the surface. This is also important production technique that can reflect the manufacturing ability of an acrylic display stand manufacturer.
Comments
Post a Comment